Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 584)

Brocade Mobility RFS Controller CLI Reference Guide 571
53-1003098-01
7
rfs7000-37FABE(config-profile TestAP81xx-bridge-vlan-1)#no tunnel
unknown-unicast
rfs7000-37FABE(config-profile TestAP81xx-bridge-vlan-1)#show context
bridge vlan 1
ip igmp snooping
ip igmp snooping querier
no tunnel unknown-unicast
rfs7000-37FABE(config-profile TestAP81xx-bridge-vlan-1)#
Related Commands:
tunnel-over-level2
bridge-vlan-mode commands
Enables extended VLAN (tunneled VLAN) traffic over level 2 MiNT links
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
tunnel-over-level2
Parameters
None
Example
rfs4000-229D58(config-profile testBrocade Mobility
RFS4000-bridge-vlan-1)#tunnel-over-level2
rfs4000-229D58(config-profile testBrocade Mobility
RFS4000-bridge-vlan-1)#commit
rfs4000-229D58(config-profile testBrocade Mobility
RFS4000-bridge-vlan-1)#show context
bridge vlan 1
description This\ is\ a\ test\ bridge\ VLAN
l2-tunnel-broadcast-optimization
bridging-mode isolated-tunnel
tunnel-over-level2
ip arp trust
ip dhcp trust
ip igmp snooping
ip igmp snooping querier
rfs4000-229D58(config-profile testBrocade Mobility RFS4000-bridge-vlan-1)#
no Disables tunneling of unicast messages, to unknown MAC destinations, on the selected VLAN bridge