Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 503)

Brocade Mobility RFS Controller CLI Reference Guide 489
53-1003098-01
6
show macauth [all|interface [|ge <1-5>|port-channel
<1-3>|up1]]
{(on )}
Example
rfs4000-229D58(config)#show macauth all
AAA-Policy is none
Mac Auth info for interface GE1
-----------------------------------
Mac Auth Enabled
Mac Auth Not Authorized
Mac Auth info for interface GE2
-----------------------------------
Mac Auth Disabled
Mac Auth Not Authorized
Mac Auth info for interface GE3
-----------------------------------
Mac Auth Disabled
Mac Auth Not Authorized
Mac Auth info for interface GE4
-----------------------------------
Mac Auth Disabled
Mac Auth Authorized
Mac Auth info for interface GE5
-----------------------------------
Mac Auth Disabled
Mac Auth Not Authorized
Mac Auth info for interface UP1
-----------------------------------
Mac Auth Disabled
Mac Auth Not Authorized
rfs4000-229D58(config)#
mint
show commands
Displays MiNT protocol configuration commands
macauth Displays MAC authentication related information for all interfaces or all interfaces
all Displays MAC authentication related information for all interfaces
interface
[|
ge <1-5>|
port-channel <1-3>|up1] Displays MAC authentication related information for a specified interface. Specify the interface using one of
the following options:
•
– Selects the interface identified by the keyword
•
ge <1-5> – Selects the GigabitEthernet interface identified by the index number
•
port-channel <1-3> – Selects the port channel interface identified by the index number
•
up1 – Selects the WAN Ethernet interface
on The following keywords are common to the ‘all’ and ‘interface’ parameters:
•
on – Optional. Displays MAC authentication related information on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.