Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 960)

Brocade Mobility RFS Controller CLI Reference Guide 949
53-1003098-01
13
ddns domainname WID
ddns multiple-user-class
excluded-address range 192.168.13.25 192.168.13.28
domain-name documentation
netbios-node-type b-node
bootfile test.txt
default-router 192.168.13.8 192.168.13.9
dns-server 192.168.13.19
netbios-name-server 192.168.13.25
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#
Related Commands:
network
dhcp-pool-mode commands
Configures the DHCP server’s network settings
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
network [|]
Parameters
network [|]
Example
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#network 192.168.13.0/24
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#show context
dhcp-pool testPool
network 192.168.13.0/24
address 192.168.13.4 class dhcpclass1
lease 100 23 59 59
ddns server 192.168.13.9
ddns domainname WID
ddns multiple-user-class
excluded-address range 192.168.13.25 192.168.13.28
domain-name documentation
no Removes the NetBIOS node type settings
Configures the network number and mask (for example, 192.168.13.0/24)
Configures a network alias to identify the network number and mask
•
– Specify the network alias name. It should be existing and configured.
A network alias defines a single network address. For example, ‘alias network $NET 1.1.1.0/24’. In this
example, the network alias name is: $NET and the network it is mapped to is: 1.1.1.0/24. For more
information see,
alias .