Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 562)

Brocade Mobility RFS Controller CLI Reference Guide 549
53-1003098-01
7
alias string
alias vlan <1-4094>
Example
The following example shows the global aliases configured. Note the network-service alias
‘$kerberos’ settings.
{(<1-65535>||
bgp|dns|ftp|ftp-data|
gopher|https|ldap|nntp|
ntp|pop3|proto|sip|smtp|
sourceport [<1-65535>|
]|ssh|telnet|
tftp|www)} After specifying the protocol, you may configure a destination port for this service. These keywords are
recursive and you can configure multiple protocols and associate multiple destination and source ports.
•
<1-65535> – Optional. Configures a destination port number from 1 - 65535
•
– Optional. Identifies the destination port by the service name provided. For example, the
secure shell (SSH) service uses TCP port 22.
•
bgp – Optional. Configures the default Border Gateway Protocol (BGP) services port (179)
•
dns – Optional. Configures the default Domain Name System (DNS) services port (53)
•
ftp – Optional. Configures the default File Transfer Protocol (FTP) control services port (21)
•
ftp-data – Optional. Configures the default FTP data services port (20)
•
gopher – Optional. Configures the default gopher services port (70)
Contd..
•
https – Optional. Configures the default HTTPS services port (443)
•
ldap – Optional. Configures the default Lightweight Directory Access Protocol (LDAP) services port
(389)
•
nntp – Optional. Configures the default Newsgroup (NNTP) services port (119)
•
ntp – Optional. Configures the default Network Time Protocol (NTP) services port (123)
•
POP3 – Optional. Configures the default Post Office Protocol (POP3) services port (110)
•
proto – Optional. Use this option to select another Internet protocol in addition to the one selected in
the previous step.
•
sip – Optional. Configures the default Session Initiation Protocol (SIP) services port (5060)
•
smtp – Optional. Configures the default Simple Mail Transfer Protocol (SMTP) services port (25)
•
sourceport [<1-65535>|] – Optional. After specifying the destination port, you may specify a
single or range of source ports.
•
<1-65535> – Specify the source port from 1 - 65535.
•
– Specify the source port range, for example 1-10.
•
ssh – Optional. Configures the default SSH services port (22)
•
telnet – Optional. Configures the default Telnet services port (23)
•
tftp – Optional. Configures the default Trivial File Transfer Protocol (TFTP) services port (69)
•
www – Optional. Configures the default HTTP services port (80)
alias string
Creates a new string alias for this profile. Or associates an existing string alias with this profile. String
aliases map a name to an arbitrary string value. For example, alias string $DOMAIN test.brocade.com’. In
this example, the string alias name is: $DOMAIN and the string value it is mapped to is: test.brocade.com.
In this example, the string alias refers to a domain name
•
– Specify the string alias name.
•
– Specify the string value.
Alias name should begin with ‘$’.
If using an existing string alias, you can apply overrides to the alias at the RF Domain level.
alias vlan
Creates a new VLAN alias for this profile. Or associates an existing VLAN alias with this profile. A VLAN alias
maps a name to a VLAN ID.
•
– Specify the VLAN alias name.
Alias name should begin with ‘$’.
<1-4094> Maps the VLAN alias to a VLAN ID
•
<1-4094> – Specify the VLAN ID from 1 - 4094.
If using an existing VLAN alias, you can apply overrides to the alias at the profile level.