Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 184)

168 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
rfs4000-229D58(config)#
Example 1:
rfs4000-229D58(config)# alias network-group $test host 192.168.1.10
192.168.1.11
rfs4000-229D58(config)# alias network-group $test network 192.168.2.0/24
192.168.3.0/24
rfs4000-229D58(config)# alias network-group $test address-range 192.168.4.10
to 192.168.4.20
In the preceding example, the network-group alias ‘$test’ includes hosts 192.168.1.10 and
192.168.1.11, networks 192.168.2.0/24 and 192.168.3.0/24 and address-range 192.168.4.10
to 192.168.4.20.
Example 2:
rfs4000-229D58(config)#alias network-service $kerberos proto tcp 749 750 80
proto tcp sourceport 20 proto udp 68 sourceport 67
rfs4000-229D58(config)#commit
In the preceding example, the network-service alias ‘$kerberos’ is configured to allow following
traffic:
• TCP traffic to destination ports 749, 750, and 80
• TCP traffic from source port 20
• UDP traffic to destination port 68 and from source port 67
rfs4000-229D58(config)#alias string $DOMAIN test.brocade.com
rfs4000-229D58(config)#show context
!
! Configuration of Brocade Mobility RFS4000 version 5.5.0.0-071B
!
!
version 2.3
!
!
........................................................................
!
client-identity Android-4-1-X precedence 1700
client-identity Android-4-2-X precedence 1800
!
alias string $DOMAIN test.brocade.com'
!
ip access-list BROADCAST-MULTICAST-CONTROL
permit tcp any any rule-precedence 10 rule-description "permit all TCP
traffic"
permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit
DHCP replies"
deny udp any range 137 138 any range 137 138 rule-precedence 20
rule-description "deny windows netbios"
deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP
multicast"
deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP
l
--More--