Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual

Page 725

712

Brocade Mobility RFS Controller CLI Reference Guide

53-1003098-01

beacon period 50

beacon dtim-period bss 1 5

beacon dtim-period bss 2 2

beacon dtim-period bss 3 5

beacon dtim-period bss 4 5

beacon dtim-period bss 5 5

beacon dtim-period bss 6 5

beacon dtim-period bss 7 5

beacon dtim-period bss 8 5

beacon dtim-period bss 9 5

beacon dtim-period bss 10 5

beacon dtim-period bss 11 5

beacon dtim-period bss 12 5

beacon dtim-period bss 13 5

beacon dtim-period bss 14 5

beacon dtim-period bss 15 5

beacon dtim-period bss 16 5

antenna-gain 12.0

guard-interval long

aggregation ampdu tx-only

aeroscout forward

ekahau forward ip 172.16.10.1 port 3

antenna-mode 2x2

antenna-diversity

max-clients 100

airtime-fairness prefer-ht weight 6

lock-rf-mode

extended-range 15

antenna-downtilt

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#no channel

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#no antenna-gain

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#no description

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#no antenna-mode

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#no beacon

dtim-period

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#no beacon period

The following example shows radio interface settings after the ‘no’ commands

are executed:

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context

interface radio1

data-rates b-only

mesh client