Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1119)

Brocade Mobility RFS Controller CLI Reference Guide 1111
53-1003098-01
19
Example
rfs7000-37FABE(config-role-policy-test-user-role-testing)#employeeid contains
TnVMoto
rfs7000-37FABE(config-role-policy-test-user-role-testing)#show context
user-role testing precedence 10
authentication-type eq kerberos
br-location contains office
captive-portal authentication-state pre-login
city exact SanJose
company exact MotorolaSolutions
country exact America
department exact TnV
emailid exact [email protected]
employeeid contains TnVMoto
rfs7000-37FABE(config-role-policy-test-user-role-testing)#
Related Commands:
encryption-type
user-role commands
Selects the encryption type for this user-defined role. Encryption ensures privacy between access
points and wireless clients. There are various modes of encrypting communication on a WLAN,
such as Counter-model CBC-MAC Protocol (CCMP), Wired Equivalent Privacy (WEP), keyguard,
Temporal Key Integrity Protocol (TKIP) etc.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
encryption-type [any|eq|neq]
encryption-type any
encryption-type [eq|neq] [ccmp|keyguard|none|tkip|wep128|wep64]
{(ccmp|keyguard|none|tkip|tkip-ccmp|wep128|wep64)}
exact The role is applied only when the employee ID, returned by the RADIUS server, exactly matches the string
specified in the role.
•
– Specify the exact string to match (this is case sensitive, and is compared against the
employee ID returned by the RADIUS server). It should be an exact match.
not-contains The role is applied only when the employee ID, returned by the RADIUS server, does not contain the string
specified in the role.
•
– Specify the string not to match (this is case sensitive, and is compared against the
employee ID returned by the RADIUS server). It should not contain the provided expression.
no Removes the employee ID configured with this user-defined role