Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1336)

1328 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
29
Date format in Syslog messages
The following output displays the wireless controller date in proper format:
rfs7000-37FABE(config)#Feb 07 11:09:00 2013: USER: cfgd: deleting session 4
rfs7000-37FABE
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#Feb 07 11:09:17 2013: USER: cfgd: deleting session 5
The date format is Month Date
Month is Feb
Date is 07
Time is 11:09:00
Year is 2013
To generate a date log, enable logging
For example, the following command has to be executed:
rfs7000-37FABE#clock set 11:09:17 07 Feb 2013
rfs7000-37FABE#
FTP data connection log
An ACL rule has to be applied and logging has to be enabled to generate a FTP data collection log.
The FTP connection is Control Connection
Feb 07 11:10:17 2013: %DATAPLANE-5-LOGRULEHIT: Matched ACL:ftpuser:ip Rule:0
Disposition:Allow Packet Src MAC:<00-19-B9-6B-DA-77> Dst
MAC:<00-15-70-81-91-6A> Ethertype:0x0800 Src IP:192.168.1.99 Dst
IP:192.168.2.102 Proto:6 Src Port:3014 Dst Port:21
Date is Feb 07
Time is 11:10:17
Year is 2013
Module name is DATAPLANE
Syslog Severity level is 5
Log ID is LOGRULEHIT
Log Message is Matched ACL
The Matching ACL is FTPuser
IP Rule sequence number is O
Disposition is Allow Packet
Source MAC Address is 00-19-B9-6B-DA-77
Destination MAC Address is <00-15-70-81-91-6A>
Ethertype is 0x0800
Source IP Address is 192.168.1.99
Destination IP Address is 192.168.2.102
Protocol Type is 6
Source Port is 3014D
Destination Port is 21
error 3 Error condition
warning 4 Warning condition
notification 5 Normal but significant condition
informational 6 Informational message
debugging 7 Debugging message