Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 551)

Brocade Mobility RFS Controller CLI Reference Guide 537
53-1003098-01
6
Example
nx4500-5CFA2B#show virtual-machine configuration team-urc
VM: team-urc
autostart : start
bootloader : /usr/bin/pygrub
cpus : ["3","2"]
disk : file:/vms/moto/team-centro/disk,xvda,w
maxmem : 3584 MB
maxvcpus : 2
memory : 1200 MB
name : team-urc
on_crash : coredump-restart
on_poweroff : destroy
on_reboot : restart
serial : pty
tty : /dev/pts/1
uuid : b80f8e19-a1f6-02c9-cbbc-10c1aeb0a170
vcpus : 1
vif : bridge=vm2br, mac=B4:C7:99:5C:FA:2F, script=vif-bridge,
type=bridge
: bridge=brpriv, mac=00:16:3e:65:ff:01, script=vif-bridge
: bridge=vm3br, mac=B4:C7:99:5C:FA:31, script=vif-bridge,
type=bridge
nx4500-5CFA2B#
nx4500-5CFA2B#show virtual-machine configuration
-----------------------------------------------------------------------------
---
NAME AUTOSTART MEMORY(MB) VCPUS
-----------------------------------------------------------------------------
---
team-rls start 512 1
team-urc start 1200 1
team-vowlan start 1500 1
-----------------------------------------------------------------------------
---
nx4500-5CFA2B#
nx4500-5CFA2B#show virtual-machine statistics
-----------------------------------------------------------------------------
---
NAME STATE VCPUS MEM (MB) BRIDGE-IF IP
-----------------------------------------------------------------------------
---
Mobility - 4 1009 - -
team-rls (not_installed) - - - -
team-urc Running 1 1200 eth0 (vmif2) 192.168.13.103
team-vowlan (not_installed) - - - -
-----------------------------------------------------------------------------
---
nx4500-5CFA2B#