Passpoint-policy – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 286
270
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
smart-cache-policy Delete a content caching
smart-rf-policy Delete a smart-rf-policy
url-list Delete a URL list
wips-policy Delete a wips policy
wlan Delete a wlan object
wlan-qos-policy Delete a wireless lan QoS configuration policy
service Service Commands
nx4500-5CFA2B(config)#
passpoint-policy
Creates a new passpoint policy and enters its configuration mode
The passpoint policy implements the Hotspot 2.0 Wi-Fi Alliance standard, enabling interoperability
between clients, infrastructure, and operators. It makes a portion of the IEEE 802.11u standard
mandatory and adds Hotspot 2.0 extensions that allow clients to query a network before actually
attempting to join it.
The passpoint policy allows a single or set of Hotspot 2.0 configurations to be global and
referenced by the devices that use it. It is mapped to a WLAN. However, only primary WLANs on a
BSSID will have their passpoint policy configuration used.
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
passpoint-policy
Parameters
passpoint-policy
Example
rfs4000-229D58(config)#passpoint-policy test
rfs4000-229D58(config-passpoint-policy-test)#?
rfs4000-229D58(config-passpoint-policy-test)#?
Passpoint Policy Mode commands:
3gpp Configure a 3gpp plmn (public land mobile network) id
access-network-type Set the access network type for the hotspot
connection-capability Configure the connection capability for the hotspot
domain-name Add a domain-name for the hotspot
hessid Set a homogeneous ESSID value for the hotspot
internet Advertise the hotspot having internet access
passpoint-policy
Specify the passpoint policy name. If a passpoint policy does not exist, it is created.