Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 514)

500 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
6
show running-config {device [|self]} {include-factory}
show running-config {include-factory}
show running-config {interface} {|ge <1-4>|include-factory|
me1|port-channel <1-2>|pppoe1|vlan <1-4094>|wwan1} {include-factory}
show running-config {ip-access-list |mac-access-list
smart-rf-policy Optional. Displays Smart RF policy configuration
wlan-qos-policy Optional. Displays WLAN QoS policy configuration
The following keyword is common to all policies:
•
– Specify the name of the policy.
include-factory The following keyword is common to all policies:
•
include-factory – Optional. Includes factory defaults
running-config Displays current running configuration
device [|self] Optional. Displays device configuration
•
– Displays a specified device configuration. Specify the MAC address of the device.
•
self – Displays the logged device’s configuration
include-factory The following keyword is common to the ‘’ and ‘self’ parameters:
•
Optional. Displays factory defaults
running-config Displays current running configuration
include-factory Optional. Includes factory defaults
running-config Displays current running configuration
interface Optional. Displays interface configuration
Optional. Displays a specified interface configuration. Specify the interface name.
ge <1-4> Optional. Displays GigabitEthernet interface configuration
•
<1-4> – Specify the GigabitEthernet interface index from 1 - 4.
me1 Optional. Displays FastEthernet interface configuration
port-channel <1-2> Optional. Displays port channel interface configuration
•
<1-2> – Specify the port channel interface index from 1 - 2.
pppoe1 Optional. Displays PPP over Ethernet interface configuration
vlan <1-4094> Displays VLAN interface configuration
•
<1-4094> – Specify the VLAN interface number from 1 - 4094.
wwan1 Optional. Displays Wireless WAN interface configuration
include-factory The following keyword is common to all interfaces:
•
Optional. Includes factory defaults
running-config Displays current running configuration
ip-access-list
Optional. Displays IP access list configuration
•
– Specify the IP access list name
mac-access-list
Optional. Displays MAC access list configuration
•
– Specify the MAC access list name
include-factory The following keyword is common to the ‘ip-access-list’ and ‘mac-access-list’ parameters:
•
Optional. Includes factory defaults