Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 896)

884 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
10
A device categorization list categorizes a device, either an AP or a wireless client, as sanctioned or
neighboring based on its MAC address or access point SSID.
For more information on creating a device categorization list, see device-categorization .
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
use device-categorization
Parameters
use device-categorization
NOTE
Advanced WIPS ignores the SSID of marked devices for device categorization.
Example
rfs7000-37FABE(config-advanced-wips-policy-test)#use device-categorization
test
Please note, advanced-wips ignores SSID of marked devices
rfs7000-37FABE(config-advanced-wips-policy-test)#
rfs7000-37FABE(config-advanced-wips-policy-test)#show context
advanced-wips-policy test
terminate 00-40-96-B0-BA-2D
use device-categorization test
server-listen-port 1009
no event dos-cts-flood trigger-against
event dos-cts-flood threshold cts-frames-ratio 8
no event dos-eapol-logoff-storm trigger-against
event dos-eapol-logoff-storm threshold eapol-start-frames-mu 99
rfs7000-37FABE(config-advanced-wips-policy-test)#
Related Commands:
device-categorization
IST> Associates a device categorization list with the profile
•
– Specify a device categorization list name.
no Resets values or disables commands
device-categorization Creates a device categorization list