beautypg.com

Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual

Page 857

background image

844

Brocade Mobility RFS Controller CLI Reference Guide

53-1003098-01

8

Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000

Service Platforms — Brocade Mobility RFS9510

Syntax:

mac-address-format [middle-hyphen|no-delim|pair-colon|pair-hyphen|quad-dot]

mac-address-format [middle-hyphen|no-delim|pair-colon|pair-hyphen|quad-dot]

case [lower|upper] attributes [all|username-password]

Parameters]

mac-address-format [middle-hyphen|no-delim|pair-colon|pair-hyphen|quad-dot]

case [lower|upper] attributes [all|username-password]

Example

rfs7000-37FABE(config-aaa-policy-test)#mac-address-format quad-dot case upper

attributes username-password

rfs7000-37FABE(config-aaa-policy-test)#show context

aaa-policy test

authentication server 5 host 172.16.10.10 secret 0 example port 1009

authentication server 5 timeout 10

accounting server 2 host 172.16.10.10 secret 0 example port 1

accounting server 2 timeout 2 attempts 2

mac-address-format quad-dot case upper attributes username-password

authentication protocol chap

--More--

rfs7000-37FABE(config-aaa-policy-test)#

Related Commands:

no

aaa-policy

Negates a AAA policy command or sets its default

Supported in the following platforms:

middle-hyphen

Configures the MAC address format as AABBCC-DDEEFF

no-delim

Configures the MAC address format as AABBCCDDEEFF (without delimitors)

pair-colon

Configures the MAC address format as AA:BB:CC:DD:EE:FF

pair-hyphen

Configures the MAC address display format as AA-BB-CC-DD-EE-FF (default setting)

quad-dot

Configures the MAC address display format as AABB.CCDD.EEFF

case [lower|upper]

Indicates the case the MAC address is formatted

lower – Indicates MAC address is in lower case. For example, aa:bb:cc:dd:ee:ff

upper – Indicates MAC address is in upper case. For example, AA:BB:CC:DD:EE:FF (default setting)

attributes
[all|
username-password]

Configures RADIUS attributes to which this MAC format is applicable

all – Applies to all attributes with MAC addresses such as username, password,
calling-station-id, and called-station-id

username-password – Applies only to the username and password fields (default setting)

no

Resets the MAC address format to default (pair-hyphen)