Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1317)

Brocade Mobility RFS Controller CLI Reference Guide 1309
53-1003098-01
28
rfs4000-229D58(config-passpoint-policy-test)#
rfs4000-229D58(config-passpoint-policy-test)#show context
hotspot2-policy test
access-network-type chargeable-public
3gpp mcc 310 mnc 970
3gpp mcc 505 mnc 14
rfs4000-229D58(config-passpoint-policy-test)#
Related Commands:
connection-capability
passpoint-policy
Configures the connection capability element in this passpoint policy. When configured, it
communicates which ports are open or closed on the Hotspot, in response to an ANQP query.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
Syntax:
connection-capability [ftp|http|icmp|ip-protocol|ipsec-vpn|pptp-vpn|sip|ssh|
tls-vpn]
connection-capability [ftp|http|icmp|ipsec-vpn|pptp-vpn|sip|ssh|tls-vpn]
[closed|open|unknown]
connection-capability ip-protocol <0-255> port <0-65535> [closed|open|unknown]
Parameters
connection-capability [ftp|http|icmp|ipsec-vpn|pptp-vpn|sip|ssh|tls-vpn]
[closed|open|unknown]
no Reverts to the default access network type setting (private)
connection-capability Configures the connection capability element in this passpoint policy
ftp Specifies the protocol type as FTP. Configures TCP port 20.
http Specifies the protocol type as HTTP. Configures TCP port 80.
icmp Specifies the protocol type as ICMP
ipsec-vpn Specifies the protocol type as IPSEC VPN. Configures ESP and UDP ports 500 and 4500.
pptp-vpn Specifies the protocol type as PPTP VPN. Configures TCP port 1723.
sip Specifies the protocol type as SIP. Configures TCP port 5060 and UDP port 5060.
ssh Specifies the protocol type as SSH. Configures TCP port 20