Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 121)

104 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
3
crypto pki generate self-signed
[generate-rsa-key|use-rsa-key]
autogen-subject-name {(email ,fqdn
,ip-address ,on )}
crypto pki generate self-signed
[generate-rsa-key|use-rsa-key]
subject-name
{(email ,fqdn
,ip-address ,on )}
pki Enables PKI management. Use this command to authenticate, export, generate, or delete a trustpoint and
its associated CA certificates.
generate Generates a CA certificate and a trustpoint
self-signed
Generates a self-signed CA certificate and a trustpoint
•
– Specify a name for the certificate and its trustpoint.
[generate-rsa-key|
use-rsa-key]
Generates a new RSA Keypair, or uses an existing RSA Keypair
•
generate-rsa-key – Generates a new RSA Keypair for digital authentication
•
use-rsa-key – Uses an existing RSA Keypair for digital authentication
•
– If generating a new RSA Keypair, specify a name for it. If using an existing
RSA Keypair, specify its name.
autogen-subject-name Auto generates the subject name from the configuration parameters. The subject name helps to identify
the certificate
email
Optional. Exports CSR to a specified e-mail address
•
– Specify the CA’s e-mail address.
fqdn Optional. Exports CSR to a specified FQDN
•
– Specify the CA’s FQDN.
ip-address Optional. Exports CSR to a specified device or system
•
– Specify the CA’s IP address.
on Optional. Exports the CSR on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
pki Enables PKI management. Use this command to authenticate, export, generate, or delete a trustpoint and
its associated CA certificates.
generate self-signed
Generates a self-signed CA certificate and a trustpoint
•
– Specify a name for the certificate and its trustpoint.
[generate-rsa-key|
use-rsa-key]
Generates a new RSA Keypair, or uses an existing RSA Keypair
•
generate-rsa-key – Generates a new RSA Keypair for digital authentication
•
use-rsa-key – Uses an existing RSA Keypair for digital authentication
•
– If generating a new RSA Keypair, specify a name for it. If using an existing
RSA Keypair, specify its name.
subject-name
Specify a subject name to identify the certificate.
•
– Specify the common name used with the CA certificate. The name should
enable you to identify the certificate easily.
Sets the deployment country code (2 character ISO code)
Sets the state name (2 to 64 characters in length)
Sets the city name (2 to 64 characters in length)
Sets the organization name (2 to 64 characters in length)
Sets the organization unit (2 to 64 characters in length)