Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 531)

Brocade Mobility RFS Controller CLI Reference Guide 517
53-1003098-01
6
Parameters
show what [contain|is] {on }
Example
rfs4000-229D58#show what contain default
-----------------------------------------------------------------------------
-----------------------------------------------------------------------
NO. CATEGORY MATCHED OTHER KEY INFO (1)
OTHER KEY INFO (2) OTHER KEY INFO (3)
NAME/VALUE NAME/VALUE
NAME/VALUE NAME/VALUE
-----------------------------------------------------------------------------
-----------------------------------------------------------------------
https-trustpoint type
mac rf_domain_name
1 device-cfg default-trustpoint rfs4000
00-23-68-22-9D-58 default
__obj_name__ name
2 firewall_policy default default
__obj_name__ name
https idle_session_timeout
3 management_policy default default
True 30
qos_policy name
control_vlan beacon_format
--More--
rfs4000-229D58#
wireless
show commands
Displays wireless configuration parameters
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
contain Searches on all the items that contain a specified word
•
– Specify a word to search (for example, MAC address, hostname etc.).
is Searches on an exact match
•
– Specify a word to search (for example, MAC address, hostname etc.).
on
ME> Optional. Performs global search on a specified device or RF Domain
•
– Specify the name of the AP, wireless controller, service platform, or RF
Domain.