Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 799)

786 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
preferred-tunnel-controller
Parameters
preferred-tunnel-controller
Example
rfs7000-37FABE(config-profile-default-rfs7000)#preferred-tunnel-controller
testtunnel
Related Commands:
radius
Profile Config Commands
Configures device level RADIUS authentication parameters
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
radius [nas-identifier|nas-port-id]
Parameters
radius [nas-identifier|nas-port-id]
preferred-tunnel-controller
Configures the preferred tunnel name
no Removes the preferred tunnel configuration
nas-identifier Specifies the RADIUS Network Access Server (NAS) identifier attribute used by this device
•
– Specifies the NAS identifier
nas-port-id Specifies the RADIUS NAS port ID attribute used by this device
•
– Specifies the NAS port ID