Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1034)

Brocade Mobility RFS Controller CLI Reference Guide 1025
53-1003098-01
16
no snmp-server [community |display-vlan-info-per-radio|enable traps|host
{<1-65535>}|manager [all|v1|v2|v3]|max-pending-requests|request-timeout|
suppress-security-configuration-level|throttle|user
[snmpmanager|snmpoperator|
snmptrap]]
no ssh {login-grace-time|port|use-key}
no [telnet|user ]
no service prompt crash-info
Example
The following example shows the management policy ‘test’ settings before the
‘no’ commands are executed:
rfs7000-37FABE(config-management-policy-test)#show context
management-policy test
http server
https server
no snmp-server Disables the SNMP server parameters
community Disables SNMP server access to a community
•
– Specify the community name.
display-vlan-info-per-radio Disables the display of the VLAN ID along with the radio interface ID (only displays the radio interface)
enable traps Disables SNMP traps
host
{<1-65535>} Removes SNMP host (trap recipient) details
•
– Specify the host’s IP address.
•
<1-65535> – Optional. Resets the port for receiving SNMP traps to default (162)
manager [all|v1|v2|v3] Disables SNMP manager
max-pending-requests Resets the maximum pending requests to default (128)
request-timeout Resets the request timeout to default (240 seconds)
suppress-security-configuratio
n-level Reverts the SNMP security configuration suppression level to default (Level 0)
throttle Disables CPU throttle for SNMP
user
[snmpmanager|
snmpoperator|snmptrap] Removes a SNMPv3 user from this management policy
•
snmpmanager – Removes a SNMP manager account
•
snmpoperator – Removes a SNMP operator account
•
snmptrap – Removes a SNMP trap user account
no ssh
{login-grace-time|port|
use-key} Resets the following secure shell settings:
•
login-grace-time – Optional. Resets SSH login grace time to its default (60 seconds)
•
port – Optional. Resets SSH port to default (port 22)
•
use-key – Optional. Resets RSA key to default
no telnet Disables Telnet on this management policy
no user Removes a specified user account from this management policy
•
– Specify the account’s username.
no service Disables service commands
prompt Disables the updating of CLI prompt settings
crash-info Excludes asterisks (*) at the end of the prompt, if the device has crash files in flash:/crashinfo