Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 420)

Brocade Mobility RFS Controller CLI Reference Guide 405
53-1003098-01
5
service show [cli|configuration-revision|mac-vendor |noc diag|snmp
session|
xpath-history]
service show [command-history|crash-info|info|mem|process|reboot-history|
startup-log|sysinfo|top|upgrade-history|watchdog] {on }
service show dhcp-lease {|on|pppoe1|vlan <1-4094>|wwan1}
{(on )}
user-cache Displays cached user details for a captive portal
on Optional. Displays server information or cached user details on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
show Displays running system statistics based on the parameters passed
cli Displays CLI tree of the current mode
configuration-revision Displays current configuration revision number
mac-vendor
Displays vendor name for a specified MAC address or Organizationally Unique Identifier (OUI) part of the
MAC address
•
– Specify the MAC address or its OUI. The first six digits of the MAC address is the OUI. Use
the AABBCC or AA-BB-CC format to provide the OUI.
noc diag Displays NOC diagnostic details
snmp session Displays SNMP session details
xpath-history Displays XPath history
show Displays running system statistics based on the parameters passed
command-history Displays command history (lists all commands executed)
crash-info Displays information about core, panic, and AP dump files
info Displays snapshot of available support information
mem Displays a system’s current memory usage (displays the total memory and available memory)
process Displays active system process information (displays all processes currently running on the system)
reboot-history Displays the device’s reboot history
startup-log Displays the device’s startup log
sysinfo Displays system’s memory usage information
top Displays system resource information
upgrade-history Displays the device’s upgrade history (displays details, such as date, time, and status of the upgrade, old
version, new version etc.)
watchdog Displays the device’s watchdog status
on The following keywords are common to all of the above:
•
on – Optional. Displays information for a specified device. If no device is specified,
the system displays information for logged device(s)
•
– Specify the name of the AP, wireless controller, or service platform.
show Displays running system statistics based on the parameters passed
dhcp-lease Displays DHCP lease information received from the server
Optional. Displays DHCP lease information for a specified router interface
•
– Specify the router interface name.