Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 868)

856 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
9
adopt
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000]
adopt
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>
[profile|rf-domain]
adopt
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>
[profile |rf-domain ]
[any|cdp-match|dhcp-option|fqdn|ip|lldp-match|mac|model-number|rf-domain|
serial-number|vlan]
adopt
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>
[profile |rf-domain ] any
adopt
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>
[profile |rf-domain ]
[cdp-match |dhcp-option |fqdn
|
ip [ |]|lldp-match |
mac {}|model-number |
serial-number |rf-domain |vlan
]
Parameters
adopt
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>
[profile |rf-domain ] any
adopt Adds an adopt device rule. The rule applies to the selected device types. Specify the device type and assign
a precedence to the rule.
The different device types are:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point, Brocade
Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade Mobility
RFS7000
•
Service Platforms —Brocade Mobility RFS9510
precedence
<1-10000> Sets the rule precedence from 1 - 10000. A rule with a lower value has a higher precedence.