Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 981
970
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
13
no
[bootfile|client-name|default-router|dns-server|domain-name|ip-address|netbio
s-name-server|netbios-node-type|next-server||respond-via-unicast]
no option
no static-route
Example
The following example shows the DHCP pool static binding settings before the
‘no’ commands are executed:
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#show context
static-binding client-identifier test
ip-address 172.16.10.9
client-name RFID
domain-name documentation
netbios-node-type b-node
bootfile test.txt
default-router 172.16.10.8 172.16.10.9
dns-server 172.16.10.7
netbios-name-server 172.16.10.23
next-server 172.16.10.24
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#no bootfile
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#no ip-address
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#no
default-router
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#no dns-server
The following example shows the DHCP pool static binding settings after the
‘no’ commands are executed:
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#show context
static-binding client-identifier test
no bootfile
Removes the BOOTP bootfile configuration
no client-name
Removes the client name from the static binding configuration
no default-router
Removes the default router from the static binding configuration
no dns-server
Removes the DNS server from the static binding configuration
no domain-name
Removes the DNS domain name
no ip-address
Removes IP addresses from the static binding configuration
no netbios-name-server
Removes the NetBIOS name server
no netbios-node-type
Removes the NetBIOS node type
no next-server
Removes the next server utilized in the boot process
no respond-via-unicast
Sets the DHCP offer and ACK as broadcast instead of unicast
no option
Resets the DHCP option to the value specified by the
no static-route
Removes static routes from the static binding configuration
Removes information for a particular subnet
Removes gateway information from a particular subnet’s routing information