Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 205
![background image](/manuals/361696/205/background.png)
Brocade Mobility RFS Controller CLI Reference Guide
189
53-1003098-01
4
no webpage internal [org-name|org-signature]
no webpage internal [acknowledgment|agreement|fail|login|no-service|welcome]
[description|footer|header|main-logo|small-logo|title]
Example
The following example shows the captive portal ‘test’ settings before the ‘no’
commands are executed:
rfs7000-37FABE(config-captive-portal-test)#show context
captive-portal test
access-type logging
access-time 35
custom-auth info bob,\ [email protected]
connection-mode https
inactivity-timeout 750
accounting syslog host 172.16.10.13 port 1
rfs7000-37FABE(config-captive-portal-test)#
rfs7000-37FABE(config-captive-portal-test)#no accounting syslog
rfs7000-37FABE(config-captive-portal-test)#no access-type
no-service
Resets the no-service page settings. The no-service Web page is displayed when critical services (such as,
AAA server, captive portal server, DHCP server, and AP to controller connectivity) are not reachable and the
user cannot access the captive portal.
welcome
Resets the welcome page settings
no webpage internal
Resets the configuration of internal Web pages displayed when a user interacts with the captive portal
org-name
Resets the organization name that is included at the top of Web pages
org-signature
Resets the organization signature (email, addresses, phone numbers) included at the bottom of Web
pages
no webpage internal
Resets the of internal Web pages settings. These are the Webpages (internally located) displayed when a
user interacts with the captive portal.
acknowledgment
Resets the acknowledgment page settings
agreement
Resets the agreement page settings
fail
Resets the fail page settings
login
Resets the login page settings
no-service
Resets the no-service page settings. The no-service Web page is displayed when critical services (such as,
AAA server, captive portal server, DHCP server) are not reachable and the user cannot access the captive
portal.
welcome
Resets the welcome page settings
description
Resets the description part of each Web page. This is the area where information about the captive portal
and user state is displayed to the user.
footer
Resets the footer portion of each Web page. A footer can contain the organization signature
header
Resets the header portion of each Web page
main-logo
Resets the main logo of each Web page
small-logo
Resets the small logo of each Web page
title
Resets the title of each Web page