Respond-via-unicast – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual

Page 983

972

Brocade Mobility RFS Controller CLI Reference Guide

53-1003098-01

Defines non standard DHCP option codes (0-254)

NOTE

An option name in ASCII format accepts a backslash (\) as an input, but is not displayed in the output
(Use

show runnig config

to view the output). Use a double backslash to represent a single

backslash.

Example

rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#option

option1 172.16.10.10

rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#show context

static-binding client-identifier test

client-name RFID

domain-name documentation

netbios-node-type b-node

netbios-name-server 172.16.10.23

next-server 172.16.10.24

option option1 172.16.10.10

rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#

respond-via-unicast

static-binding-mode commands

Sends a DHCP offer and DHCP acknowledge as unicast messages

Supported in the following platforms:

•

Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point

•

Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000

•

Service Platforms — Brocade Mobility RFS9510

Syntax:

respond-via-unicast

Parameters

None