Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1044)

Brocade Mobility RFS Controller CLI Reference Guide 1035
53-1003098-01
16
Parameters
telnet {port <1-65535>}
Example
rfs7000-37FABE(config-management-policy-test)#telnet port 200
rfs7000-37FABE(config-management-policy-test)#show context
management-policy test
telnet port 200
no http server
https server
ftp username superuser password 1
626b4033263d6d2ae4e79c48cdfcccb60fd4c77a8da9e365060597a6d6570ec2 rootdir dir
ssh port 162
snmp-server community snmp1 ro
snmp-server user snmpmanager v3 encrypted des auth md5 0 motorola1123
snmp-server host 172.16.10.23 v3 162
aaa-login radius external
aaa-login radius policy test
idle-session-timeout 0
restrict-access host 172.16.10.2 log all
rfs7000-37FABE(config-management-policy-test)#
Related Commands:
user
management-policy
Adds new user account
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
user password [0 |1 |]
role
[helpdesk|monitor|network-admin|security-admin|superuser|system-admin|
web-user-admin] access [all|console|ssh|telnet|web]
Parameters
telnet Enables Telnet
port <1-65535> Optional. Configures the Telnet port. This is the port used for Telnet connections.
•
<1-65535> – Sets a value from 1 - 165535. The default port is 23.
no Disables Telnet