Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 244)

228 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
mark-device <1-1000> [sanctioned|neighboring] br {mac |ssid {mac
}}
mark-device [sanctioned|neighboring] client {mac }
Example
rfs7000-37FABE(config-device-categorization-rfs7000)#mark-device 1 sanctioned
br
mac 11-22-33-44-55-66
rfs7000-37FABE(config-device-categorization-rfs7000)#show context
device-categorization rfs7000
mark-device 1 sanctioned br mac 11-22-33-44-55-66
rfs7000-37FABE(config-device-categorization-rfs7000)#
Related Commands:
no
device-categorization-mode commands
Removes a device from the device categorization list
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
no mark-device <1-1000> [neighboring|sanctioned] [br|client]
no mark-device <1-1000> [sanctioned|neighboring] client {mac }
<1-1000> Configures the device categorization entry index number
sanctioned Marks a device as sanctioned. A sanctioned device is authorized to use network resources.
neighboring Marks a device as neighboring. A neighboring device is a neighbor in the same network as this device.
br
{mac |
ssid } Marks a specified AP as sanctioned or neighboring based on its MAC address or SSID
•
mac – Optional. Specify the AP’s MAC address
•
ssid – Optional. Specify the AP’s SSID. After specifying the SSID, you can optionally specify its
MAC SSID.
NOTE: All APs are marked if no specific MAC address or SSID is provided.
<1-1000> Configures the device categorization entry index number
sanctioned Marks the wireless client as sanctioned. A sanctioned device is authorized to use network resources.
neighboring Marks the wireless client as neighboring. A neighboring device is a neighbor in the same network as this
device.
client {mac } Marks a specified wireless client as sanctioned or neighboring based on its MAC address
•
mac – Optional. Specify the wireless client’s MAC address
no Removes an entry from the device categorization list