Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 832)

Brocade Mobility RFS Controller CLI Reference Guide 819
53-1003098-01
7
mac-name
Example
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#mac-name 00-04-96-4A-A7-08
5.4TestAP
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#show context
br71xx 00-04-96-4A-A7-08
use profile default-br71xx
use rf-domain default
hostname TechPubAP7131
area RMZEcospace
floor 5thfloor
layout-coordinates 1.0 2.0
location Block3B
contact motorolasolutions
country-code us
channel-list 2.4GHz 1,2
mac-name 00-04-96-4A-A7-08 5.4TestAP
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#
Related Commands:
neighbor-info-interval
Device Config Commands
Configures neighbor information exchange interval
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
neighbor-info-interval <1-100>
Parameters
neighbor-info-interval <1-100>
Example
rfs7000-37FABE(config-device-00-04-96-4A-A7-08)#neighbor-info-interval 50
Configures a MAC address for the device
•
– Set the 'friendly' name used for this MAC address
no Removes the device’s friendly name to MAC address mapping
neighbor-info-interval
<1-100> Sets neighbor information exchange interval
•
<1-100> – Specify a value from 1 - 100 seconds.