Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1193)

Brocade Mobility RFS Controller CLI Reference Guide 1185
53-1003098-01
22
accelerated-multicast autodetect classification voice
rfs7000-37FABE(config-wlan-qos-test)#
voice-prioritization
wlan-qos-policy
Prioritizes voice clients over other clients (for non-WMM clients). This gives priority to voice and
voice management packets and is supported only on certain legacy Brocade VOIP phones. This
feature is enabled by default.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
voice-prioritization
Parameters
None
Example
rfs7000-37FABE(config-wlan-qos-test)#voice-prioritization
rfs7000-37FABE(config-wlan-qos-test)#show context
wlan-qos-policy test
classification non-wmm video
svp-prioritization
voice-prioritization
multicast-mask primary 11-22-33-44-55-66/22-33-44-55-66-77
classification non-unicast normal
rate-limit wlan from-air rate 55
rate-limit wlan from-air max-burst-size 6
rate-limit wlan from-air red-threshold best-effort 10
rate-limit client from-air red-threshold background 3
qos trust dscp
qos trust wmm
accelerated-multicast autodetect classification voice
rfs7000-37FABE(config-wlan-qos-test)#
wmm
wlan-qos-policy
Configures 802.11e/Wireless Multimedia (WMM) parameters for this WLAN QoS policy
WMM makes it possible for both home networks and Enterprises to decide which data streams are
most important and assign them a higher traffic priority.