Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1137)

Brocade Mobility RFS Controller CLI Reference Guide 1129
53-1003098-01
20
assignable-power [2.4GHz|5GHz] [max|min] <1-20>
Example
rfs7000-37FABE(config-smart-rf-policy-test)#assignable-power 5GHz max 20
rfs7000-37FABE(config-smart-rf-policy-test)#assignable-power 5GHz min 8
rfs7000-37FABE(config-smart-rf-policy-test)#show context
smart-rf-policy test
area test channel-list 2.4GHz 1,2,3
assignable-power 5GHz min 8
assignable-power 5GHz max 20
rfs7000-37FABE(config-smart-rf-policy-test)#
Related Commands:
channel-list
smart-rf-policy
Assigns a list of channels, for the selected frequency, used in Smart RF scans
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
channel-list [2.4GHz|5GHz]
Parameters
channel-list [2.4GHz|5GHz]
Example
rfs7000-37FABE(config-smart-rf-policy-test)#channel-list 2.4Ghz 1,12
2.4GHz [max|min]
<1-20> Assigns a power range on the 2.4 GHz band
•
max <1-20> – Sets the upper limit in the range from 1 dBm - 20 dBm (default is 17 dBm)
•
min <1-20> – Sets the lower limit in the range from 1 dBm - 20 dBm (default is 4 dBm)
5GHz [max|min]
<1-20> Assigns a power range on the 5.0 GHz band
•
max <1-20> – Sets the upper limit in the range from 1 dBm - 20 dBm (default is 17 dBm)
•
min <1-20> – Sets the lower limit in the range from 1 dBm - 20 dBm (default is 4 dBm)
no Resets assignable power to its default
2.4GHz Assigns a channel list for the 2.4 GHz band
•
– Specify a comma separated list of channels
5GHz Assigns a channel list for the 5.0 GHz band
•
– Specify a comma separated list of channels