Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 36)

18 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
2
captive-portal-page-upload rf-domain [
NAME>|all]
{from-controller} {(upload-time )}
captive-portal-page-upload cancel-upload [|all|on rf-domain
[|all]]
captive-portal-page-upload load-file
Example
rfs4000-229D58>captive-portal-page-upload test1 00-04-96-4A-A7-08 upload-time
03/01/2013-12:30
-----------------------------------------------------------------------------
---
CONTROLLER STATUS MESSAGE
-----------------------------------------------------------------------------
---
00-23-68-22-9D-58 Fail Failed to initiate page upload
-----------------------------------------------------------------------------
---
rfs4000-229D58>
rfs4000-229D58>captive-portal-page-upload cancel-upload 00-04-96-4A-A7-08
captive-portal-page-upload
Uploads advanced pages of the captive portal identified by the parameter
•
– Specify captive portal’s name (should be existing and configured).
rf-domain
[|all] Uploads to all APs within a specified RF Domain or all RF Domains
•
– Uploads to APs within a specified RF Domain. Specify the RF Domain name.
•
all – Uploads to APs across all RF Domains
from-controller Optional. Uploads to APs from the adopted device
upload-time Optional. Configures an AP upload time
•
– Specify upload time in the MM/DD/YYYY-HH:MM or HH:MM format.
captive-portal-page-upload
cancel-upload Cancels a scheduled AP upload
cancel-upload
[|
all|on rf-domain
[|
all] Select one of the following options:
•
– Cancels scheduled upload to a specified AP. Specify the AP’s MAC address or
hostname
•
all – Cancels all scheduled AP uploads
•
on rf- domain – Cancels all scheduled uploads within a specified RF Domain or all RF Domains
•
– Cancels scheduled uploads within a specified RF Domain. Specify
RF Domain name.
•
all – Cancels scheduled uploads across all RF Domains
captive-portal-page-upload
load-file Loads captive-portal advanced pages
Specify the captive portal’s name and location. The captive portal should be existing and configured.
•
– Specifies file location in the following format:
tftp://[:port]/path/file
ftp://:@[:port]/path/file
sftp://:@[:port]>/path/file
http://[:port]/path/file
cf:/path/file
usb:/path/file