Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 150
![background image](/manuals/361696/150/background.png)
Brocade Mobility RFS Controller CLI Reference Guide
133
53-1003098-01
3
Example
rfs7000-37FABE#ping 172.16.10.4 count 6
PING 172.16.10.4 (172.16.10.4) 100(128) bytes of data.
108 bytes from 172.16.10.4: icmp_seq=1 ttl=64 time=3.93 ms
108 bytes from 172.16.10.4: icmp_seq=2 ttl=64 time=0.367 ms
108 bytes from 172.16.10.4: icmp_seq=3 ttl=64 time=0.328 ms
108 bytes from 172.16.10.4: icmp_seq=4 ttl=64 time=0.295 ms
108 bytes from 172.16.10.4: icmp_seq=5 ttl=64 time=0.340 ms
108 bytes from 172.16.10.4: icmp_seq=6 ttl=64 time=0.371 ms
--- 172.16.10.4 ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5001ms
rtt min/avg/max/mdev = 0.295/0.939/3.936/1.340 ms
rfs7000-37FABE#
pwd
Displays the full path of the present working directory, similar to the UNIX pwd command
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
pwd
Parameters
None
Example
rfs4000-229D58#pwd
flash:/
rfs4000-229D58#
rfs4000-229D58#dir
Directory of flash:/.
drwx Wed Jan 30 02:45:10 2013 log
drwx Sat Jan 1 00:00:09 2000 configs
dont-fragment
{count|size}
Optional. Sets the dont-fragment bit in the ping packet. Packets with the dont-fragment bit specified, are not
fragmented. When a packet, with the dont-fragment bit specified, exceeds the specified Maximum
Transmission Unit (MTU) value, an error message is sent from the device trying to fragment it.
•
count <1-10000> – Sets the pings to the specified destination from 1 - 10000. The default is 5.
•
size – <1-64000> – Sets the size of ping payload size from 1 - 64000 bytes. The default is 100 bytes.
size <1-64000>
Optional. Sets the ping packet’s size in bytes
•
<1-64000> – Specify the ping payload size from 1 - 64000 bytes. The default is 100 bytes.