Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 770)

Brocade Mobility RFS Controller CLI Reference Guide 757
53-1003098-01
7
Syntax:
legacy-auto-downgrade
Parameters
None
Example
rfs7000-37FABE(config-profile-default-rfs7000)#legacy-auto-downgrade
Related Commands:
legacy-auto-update
Profile Config Commands
Auto updates an Brocade Mobility 650 Access Point or Brocade Mobility 71XX Access Point legacy
access point firmware
Supported in the following platforms:
• Access Points —Brocade Mobility 650 Access Point, Brocade Mobility 7131 Access Point
Syntax:
legacy-auto-update [br650|br71xx image ]
Parameters
legacy-auto-update [br650|br71xx image ]
Example
rfs7000-37FABE(config-profile-default-rfs7000)#legacy-auto-update br71xx
image flash:/ap47d.img
Related Commands:
lldp
Profile Config Commands
Configures LLDP settings
Supported in the following platforms:
no Prevents device firmware from auto downgrading when legacy devices are detected
legacy-auto-update Updates a legacy Brocade Mobility 650 Access Point or Brocade Mobility 7131 Access Point access point
firmware
br650 Auto updates legacy Brocade Mobility 650 Access Point firmware
br71xx
image Auto updates legacy Brocade Mobility 7131 Access Point firmware
•
image – Sets the path to the firmware image
•
– Specify the path and filename in the flash:/br.img format.
no Disables automatic legacy firmware upgrade