Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 519)

Brocade Mobility RFS Controller CLI Reference Guide 505
53-1003098-01
6
Parameters
show sessions {on }
Example
rfs4000-229D58(config)#show sessions
INDEX COOKIE NAME START TIME FROM ROLE
1 49 admin 2013-02-15 15:45:10 192.168.100.225
superuser
2 2 snmp 2013-01-16 22:37:59 127.0.0.1
superuser
3 3 snmp2 2013-01-16 22:37:59 127.0.0.1
superuser
rfs4000-229D58(config)#
site-config-diff
show commands
Displays the difference in site configuration available on the NOC and a site.
The Mobility HM network defines a three-tier structure, consisting of multiple wireless sites
managed by a single Network Operations Center (NOC) controller, The NOC controller constitutes
the first and the site controllers constitute the second tier of the hierarchy. The site controllers may
or may not be grouped to form clusters. The site controllers in turn adopt and manage access
points that form the third tier of the hierarchy.
NOC controllers possess default site configuration details. Overrides applied at the site level result
in a mismatch of configuration at the site and the default site configuration available on the NOC
controller. Use this command to view this difference.
Supported in the following platforms:
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
NOTE
This command returns an output only when executed on a NOC controller.
Syntax:
show site-config-diff
Parameters
show site-config-diff
sessions Displays CLI sessions initiated on a device
on Optional. Displays CLI sessions on a specified device
•
– Specify the name of the AP, wireless controller, or service platform.
site-config-diff
Displays the configuration difference for the specified site
•
– Specify the site name.