Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 316)

300 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
Parameters
no
[alias|channel-list|contact|control-vlan|controller-managed|country-code|layo
ut|
location|mac-name|override-smartrf|override-wlan|sensor-server|stats|timezone
|
tree-node|use]
Example
The following example shows the default RF Domain settings before the ‘no’
commands are executed:
rfs7000-37FABE(config-rf-domain-default)#show context
rf-domain default
location SanJose
contact Bob+919621212577
country-code in
channel-list 2.4GHz 1,2,3,4,5,6,7,8,9,10
mac-name 11-22-33-44-55-66 TestDevice
layout area Ecospace floor Floor5 map-location www.fiestfloor.com units
meters
control-vlan 1
rfs7000-37FABE(config-rf-domain-default)#
rfs7000-37FABE(config-rf-domain-default)#no channel-list 2.4GHz 1-10
rfs7000-37FABE(config-rf-domain-default)#no mac-name 11-22-33-44-55-66
rfs7000-37FABE(config-rf-domain-default)#no location
rfs7000-37FABE(config-rf-domain-default)#no control-vlan
The following example shows the default RF Domain settings after the ‘no’
commands are executed:
no alias Removes aliases associated with this RF Domain
no channel-list Removes the channel list for the 2.4 GHz and 5.0 GHz bands. Also disables dynamic update of a channel list.
no contact Removes configured contact details
no control-vlan Removes the VLAN configured for controlling traffic
no controller-managed Removes the adopting controller (access point, wireless controller, or service platform) as this RF Domain’s
manager
no country-code Removes the country of operation configured
no layout Removes RF Domain layout details
no location Removes RF Domain location details
no mac-name Removes the MAC address to name mapping
no override-smartrf Resets override Smart RF settings to default
no override-wlan Resets override WLAN settings to default
no sensor-server Disables AirDefense sensor server details
no stats Resets RF Domain stats settings
no timezone Removes RF Domain’s time zone
no tree-node Removes the configured hierarchial (tree-node) structure under which this RF Domain appears
no use Resets RF Domain profile settings