Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 945)

Brocade Network Advisor SAN + IP User Manual 873
53-1003155-01
ACL Accounting
21
2. Select the Clear all counters on device check box.
3. Click OK on the ACL Accounting dialog box.
Viewing ACL counters
Before you can view ACL counters, you must enable ACL accounting on the product (refer to
“Enabling or disabling ACL accounting” on page 872).
To view ACL accounting on a product, select an Ethernet router, Ethernet core router, or Ehternet
Backbone router product and select Configure > Security > Layer 2/3 ACL > Product.
The Product_Name - Layer 2/3 ACL Configuration dialog box displays. Go to step 4 .
OR
To view ACL accounting on a port, complete the following steps.
1. Select an Ethernet router, Ethernet core router, or Ehternet Backbone router product and select
Configure > Security > Layer 2/3 ACL > Port.
The Port Selection - Layer 2/3 ACL dialog box displays.
2. Select a port in the Available Ports list and click the right arrow button.
3. Click OK on the Port Selection - Layer 2/3 ACL dialog box.
The Product_Name - Port_Number - Layer 2/3 ACL Configuration dialog box displays.
4. Select a duration (1 second, 1 minute, 5 minutes, or Cumulative) from the Hit Stats Duration
list.
5. Click Refresh.
The last time (client time) the Management application client successfully collected the hit
statistics displays in the Refresh Time field.
The number of hits for the ACL displays in the Hits column of the Details of Selected ACL list.
(Products level only) Ports that have the selected ACL bound display in the Assigned Ports list.
6. Click Cancel on the Product_Name - Layer 2/3 ACL Configuration dialog box or Product_Name
- Port_Number - Layer 2/3 ACL Configuration dialog box.