Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1128)

1056 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Creating a new encryption group
25
FIGURE 434 Next Steps dialog box
13. Review the post-configuration instructions, which you can copy to a clipboard or print for later,
then click Finish to exit the wizard.
Configuring key vault settings for NetApp Link
Key Manager (LKM/SSKM)
The following procedure assumes you have already configured the initial steps in the Configure
Switch Encryption wizard. If you have not already done so, go to
“Creating a new encryption group”
on page 1045.
Figure 435 shows the key vault selection dialog box for LKM/SSKM.