Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2418)

2346 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Database tables and fields
I
TABLE 174 HBA_REMOTE_PORT
Field Definition Format Size
ID Autogenerate primary column. int
SYMBOLIC_NAME The symbolic name associated with the remote port. varchar 256
PORT_WWN The world wide name of the remote device''s port. char 23
NODE_WWN The world wide name of the remote device char 23
NAME The name associated with the device varchar 256
FC_ADDRESS FC Address for the port in hex varchar 6
FRAME_DATA_SIZE The frame size, in bytes, of the device.
The default value is 512. int
SPEED Operating speed of the remote port. int
STATE Indicates whether the device is online or offline.
The default value is ‘Offline’. varchar 64
SUPPORTED_COS The types of classes that are supported on the
remote port; for example, Class-3 varchar 32
DEVICE_TYPE The type of the device; for example, Disk or Tape. varchar 64
BIND_TYPE The persistent bind type. The default value is 0. smallint
TARGET_ID The identifier of the target device. The default value
is 0. int
ROLE The role of the device (target or initiator) varchar 64
VENDOR The vendor of the device varchar 256
PRODUCT_ID The device''s identifier. varchar 256
PRODUCT_VERSION Field which stores information regarging target rate
limiting on the remote port varchar 256
QOS_PRIORITY QOS Priority on the target. The default value is
'Unknown'. varchar 64
QOS_FLOW_ID QOS Flow ID on the target. The default value is 0. varchar 64
CURRENT_SPEED Current speed of the remote port, as enforced by
TRL.
The default value is 0. varchar 64
TRL_ENFORCED True if TRL(Target Rate limit) is enforced. varchar 16
BUS_NO Channel number in the PCI Bus. The default value is
0. varchar 32
FCP_IM_STATE Indicates whether the Fibre Channel Protocol Input
Method (FCP-IM) is online or offline. varchar 128
IO_LATENCY_MIN Minimum IO Latency value (< 79) in milliseconds and
is calculated when HBA port starts SCSI (FCP)
exchanges varchar 32
IO_LATENCY_MAX IO Latency value in milliseconds and is calculated
when HBA port starts SCSI (FCP) exchanges varchar 32
IO_LATENCY_AVERAGE Average IO Latency value in milliseconds and is
calculated when HBA port starts SCSI (FCP)
exchanges varchar 32