Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1921)

Brocade Network Advisor SAN + IP User Manual 1849
53-1003155-01
Schedule PoE power deployment
46
• Consumption (W) — The power consumed by the device connected to the port in Watts.
• Consumption % — The power consumed as a percentage of allocated power.
• Type — The type of the device connected to the port. Values include: 802.3af and 802.3at.
• Class — The class of the device connected to the port. Values include: Class 0 through
Class 4.
• Priority — The priority of the device connected to the port. Values include: invalid, critical,
high, low, medium, and other.
• Mfr.. — The manufacturer of the device connected to the port. This information is obtained
using LLDP neighbor details command.
• Model — The model of the device connected to the port. This information is obtained using
LLDP neighbor details command.
• Software — The software version on the attached device.
7. Click Close to close the Scheduled Ports [Schedule_Name] dialog box.
8. Click Close to close the Schedule PoE On/Off dialog box.
9. Click Close to close the Power Center dialog box.
Deleting a power deployment schedule
To delete a power deployment schedule, complete the following steps.
1. Select Monitor > Power Center.
The Power Center dialog box displays.
2. Select PoE Products from the View list.
3. Select a port, product, port group, or product group in the PoE Product list and click Schedule
PoE On/Off.
The Schedule PoE On/Off dialog box displays.
4. Select the schedule you want to delete from the All Schedules list.
To delete more than one deployment schedule, press Ctrl and click each schedule you want to
delete.
5. Click Delete.
6. Click Yes on the confirmation message.
7. Click Close to close the Schedule PoE On/Off dialog box.
8. Click Close to close the Power Center dialog box.