Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 559)

Brocade Network Advisor SAN + IP User Manual 487
53-1003155-01
Customizing the main window
9
Zooming in
To zoom in on the Connectivity Map, use one of the following methods:
• Click the zoom-in icon ( ) on the Connectivity Map toolbar.
• Press CTRL and the plus sign on the number pad on the keyboard.
• Use the Zoom dialog box.
a. Select View > Zoom.
The Zoom dialog box displays.
FIGURE 215 Zoom dialog box
b. Select a zoom percentage.
c. Click OK to save your changes and close the Zoom dialog box.
Zooming out
To zoom out of the Connectivity Map, use one of the following methods:
• Click the zoom-out icon ( ) on the Connectivity Map toolbar.
• Press CTRL and the minus sign on the number pad on the keyboard.
• Use the Zoom dialog box.
a. Select View > Zoom.
The Zoom dialog box displays.
b. Select a zoom percentage.
c. Click OK to save your changes and close the Zoom dialog box.
Showing levels of detail on the Connectivity Map
You can configure different levels of detail on the Connectivity Map, making device management
easier.
Viewing fabrics
To view only fabrics, without seeing groups, products, or ports, select View > Show> Fabrics Only.
Viewing groups
To view only groups and fabrics, without seeing products, or ports, select View > Show> Groups
Only.