Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2182)

2110 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
SAN main menus
A
FICON — Select to display the FICON events related to the
selected device or fabric.
Product Event — Select to display errors related to SNMP
traps and Client-Server communications.
Product Status — Select to display operational status
changes of managed products.
Security — Select to display security information.
Syslog — Select to display Syslog events related to the
selected device or fabric.
Port Auto Disable — Select to configure port auto disable
flag on individual FC_ports or all ports on a selected
device, as well as unblock currently blocked ports.
Port Connectivity — Select to view port connectivity on the
selected device.
Port Optics (SFP) — Select to display the properties
associated with a selected small form-factor pluggable
(SFP) transceiver on the selected device.
SNMP Setup — Select to configure SNMP traps.
Trap Forwarding — Select to configure trap forwarding.
Product Trap Recipients — Select to register a host as a
trap recipient.
Event Reception — Select to configure the server to
accept or drop traps and specify SNMP credentials and
community strings, which are required to decode traps on
receiving them.
Informs — Select to enable or disable SNMP informs on
the device.
Syslog Configuration — Select to configure Syslog for the
Management server.
Syslog Forwarding — Select to configure Syslog
forwarding.
Product Syslog Recipients — Select to register a host as a
syslog recipient.
Technical Support — Select to configure technical support
data.
SupportSave — Select to capture server and client
support data.
Product/Host SupportSave. (Fabric OS devices only)
Select to configure technical support data collection.
Upload Failure Data Capture — Select to configure
capture failure data for Fabric OS devices.
View Repository — Select to view repository data.
Troubleshooting — Select to troubleshoot your SAN.
Menu Command Command Options