Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1103)

Brocade Network Advisor SAN + IP User Manual 1031
53-1003155-01
Steps for connecting to a KMIP-compliant SafeNet KeySecure
25
8. Select Server as the Certificate Purpose and verify the Certificate Duration length. The default
is 3649 days.
9. Paste the server certificate contents that you copied (refer to step 5) in the Certificate Request
text box, then click Sign Request.
The Certificate and CA Configuration page refreshes and the certificate information is
displayed under Certificate Request Information. (Refer to
Figure 405 .)
FIGURE 405 KeySecure Certificate and CA Configuration page - Certificate Request Information
10. Click Download after the request has been signed, and save the certificate to a local location.
11. Click Install Certificate.
12. Open the downloaded certificate and copy the certificate data from
-----
BEGIN CERTIFICATE
REQUEST
-----
to
-----
END CERTIFICATE REQUEST
--–––
lines. Be careful to exclude extra
carriage returns or spaces after the data
13. Paste the server certificate request contents in the Certificate Installation text box, then click
Save. (Refer to Figure 406 .)