Restoring a configuration from the repository – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 712

640
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Configuration file management
14
•
Restore button — Select one or more configuration files from the Configurations table and
click to restore that configuration. To restore a configuration, refer to
configuration from the repository”
•
View button — Select a row in the Configurations table and click to display the contents of
the selected configuration. Refer to
“Viewing configuration file content”
•
Delete button — Select one or more configurations from the Configurations table and click
to manually delete the configuration from the repository of the management server. Refer
to
•
Export button — Select a configuration and click to launch the Export Configuration dialog
box, which allows you to export the configurations to a text file. Refer to
on page 644 for more information.
•
Import button — Select a configuration and click to launch the Import Configuration dialog
box, which allows you to import the configurations to a text file. Refer to
on page 645 for more information.
•
Compare button — Select two configurations (same product or two different products) and
click to launch the Compare dialog box with the differences between the two
configurations highlighted. Refer to
“Comparing switch configurations”
more information.
NOTE
You cannot delete the baseline or the latest configuration.
5. Click Cancel to close.
6. Click OK to confirm.
Restoring a configuration from the repository
If you delete a fabric or switch from discovery, the configuration remains in the repository until you
delete it manually. Stored configurations are linked to the switch WWN; therefore, if the IP address
or switch name is changed and then rediscovered, the Configuration File Manager dialog box
displays the new switch name and IP address for the old configuration.
NOTE
This feature requires a Trial or Licensed version.
1. Select Configure > Configuration File > Configuration File Manager.
The Configuration File Manager dialog box displays.