Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 645)

Brocade Network Advisor SAN + IP User Manual 573
53-1003155-01
Launching an Element Manager
12
1. Select the switch to which you want to connect.
2. Select Tools > Product Menu > Telnet.
The Telnet session window displays.
NOTE
On Linux systems, you must use CTRL + BACKSPACE to delete text in the Telnet session
window.
Launching an Element Manager
Element Managers are used to manage Fibre Channel switches and directors. You can open a
device’s Element Manager directly from the application.
To launch a device’s Element Manager, complete the following steps.
On the Connectivity Map, double-click the device you want to manage.
The Element Manager displays.
OR
On the Connectivity Map, right-click the device you want to manage and select Element Manager >
Hardware.
The Element Manager displays.
OR
1. Select a device.
2. Select Configure > Element Manager > Hardware.
The Element Manager displays.
OR
1. Select a device.
2. Click the Element Manager icon on the toolbar.
The Element Manager displays.
Launching Web Tools
Use Web Tools to enable and manage Fabric OS access gateway, switches, and directors. You can
open Web Tools directly from the application. For more information about Web Tools, refer to the
Web Tools Administrator’s Guide. For more information about Fabric OS access gateway, switches,
and directors, refer to the documentation for the specific device.
To launch a device’s Element Manager, complete the following steps.