Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 2261)

Brocade Network Advisor SAN + IP User Manual 2189
53-1003155-01
Viewing SAN device properties
E
FIGURE 913 Port Properties dialog box
NOTE
Depending on the port type, some of the following properties may not be available for all products.
TABLE 228 Port properties
Field Description
Additional Port Info Additional error information relating to the selected port.
Address The address of the port.
Addressing Mode The addressing mode of the switch.
Active FC4 Types The active FC4 types.
Active Tunnels The number of active tunnels.
Area ID (hex)/Port Index (hex) The area identifier, in hexadecimal, of the switch-to-product connection.
Associated GE Port The port number of the associated GE port.
Attached Port # The port number of the attached product.
Back to Edge Routing Support Whether back to edge routing is supported.
Bandwidth The bandwidth of the FCIP tunnel.
Blocked The configuration of the switch (blocked or unblocked).
Bottleneck Status Whether the port is bottlenecked or not.
Buffers Desired The number of buffers desired but not allocated.
Buffers Allocated The number of buffers allocated.
Capability The node capability.
Class The class of the port.
Class of Service The class of service.