Adapters faulty sfp report – Brocade Network Advisor SAN + IP User Manual v12.3.0 User Manual
Page 2170
2098
Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Host adapter reports
52
Adapters Faulty SFP report
The Adapters Faulty SFP report lists all Brocade adapters with unsupported or faulty small
form-factor pluggable (SFP) transceivers. This report is only available for Brocade adapters.
For adapters with unsupported SFPs, this report is the same as the Adapters Inventory report
filtered to show only those hosts with adapter ports that have unsupported SFPs. For a complete
list of fields and components of the Adapters Inventory report, refer to the
For adapters with degrading SFPs, there are additional columns in the table that show the
SFP/SFP+ and pluggable optical module (POM) properties for the degrading SFP.
OEM Info
The OEM information for the adapter.
Port ID
The port number or PCI function index, depending on adapter type and driver version.
Port Name
The port name or Eth device name, depending on port type.
Port HCM Name
The name of the port configured in HCM.
Symbolic Name
The symbolic name of the port
Node WWN/MAC
The port’s WWN or MAC address.
Port WWN/MAC
The node’s (parent device) WWN or MAC address.
Type
The type of port, for example, IP-Port, N, or NL.
QoS Enabled
Whether QoS is enabled (True) or disabled (False).
Frame Field Size (Bytes)
The frame field size in bytes.
Media
The type of media; for example, 8G-sw (8 Gbps software).
FC Address
The port’s Fibre Channel address.
Fabric Name
The name of the Fabric.
Zone Alias
The alternate name of the zone.
Fabric Assigned Address
The state (enabled, disabled, or N/A) of the fabric assigned address for the adapter.
WWN Source
The source of the world wide name. Options include:
Fabric — The WWN is assigned from the fabric. The fabric assigned address must be
enabled.
Factory — The WWN is assigned at the factory.
N/A — Not applicable.
Boot Over SAN
Whether Boot over SAN is enabled or disabled.
Max Supported Speed
The maximum speed that is supported on the port. For the FC port, the maximum
speed is 8 Gbps.
Status
The status of the Ethernet port; for example, Linkup or Linkdown.
TABLE 209
Adapters Inventory report fields and components (Continued)
Field/Component
Description