Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 720)

648 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Configuration file management
14
Tracking changes from the baseline configuration
Use change tracking to compare the latest backup configuration file with the configuration that is
designated as the baseline.
NOTE
Change Tracking tab is not displayed for imported, unmanaged, or unmonitored switches.
1. Click the SAN tab.
2. Select Configure > Configuration File > Configuration File Manager.
The Configuration File Manager dialog box displays.
3. Click the Change Tracking tab.
The Change Tracking tab of the Configuration File Manager dialog box displays, as shown in
Figure 268 on page 648
FIGURE 268 Change Tracking tab
The Change Tracking tab displays the following information:
• Name — The switch name.
• Fabric Name — The name of the fabric.
• WWN — The world wide name of the switch selected to be the destination switch.
• Baseline Backup Time — The date and time when the baseline configuration for the device
was copied into the repository of the management server.
• Backup Time — The time when the last backup attempt occurred for the selected device.
• Change Status — The change status of the latest device backup.