Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1522)

1450 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Port VLANs
36
The Select Classifiers button is disabled by default. To enable the button, select an untagged
and classifier-configured port in the Selected Ports list..
FIGURE 651 Select Classifier Groups dialog box
NOTE
The cTag classifier list is disabled when Untagged is selected.
NOTE
The MAC and MAC Group classifier configurations are not supported in Network Advisor
Adding or modifying dual mode ports
You can configure an interface in a VLAN as a dual mode port by assigning it as a tagged port to
one VLAN and as an untagged port to another VLAN. You can add a dual mode port to any VLAN
except the default VLAN, VLAN 1.
NOTE
Dual mode is not supported on Network OS products.
To add or modify a dual mode port, perform the following steps.
1. Follow the steps in “Adding or modifying port VLANs” on page 1448 to familiarize yourself with
adding tagged and untagged ports to a VLAN.
2. Select Configuration Manager > VLAN Manager.
The VLAN Manager dialog box - VLAN View tab displays.
3. Click the Product View tab.
4. Click Add.
5. From the Available Ports list on the Ports tab of the Add VLAN dialog box, select the interface
that will be added as a dual mode port.
6. Select a VLAN from the Select VLANs list.