Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 709)

Brocade Network Advisor SAN + IP User Manual 637
53-1003155-01
Configuration file management
14
1. Select Configure > Configuration File > Schedule Backup.
The Schedule Backup of Switch Configurations dialog box displays.
FIGURE 262 Schedule Backup of Switch Configurations dialog box
2. Select the Enable scheduled backup check box.
3. Set the Schedule parameters. These include the following:
- The desired Frequency for backup operations (daily, weekly, monthly).
- The Day you want backup to run.
If Frequency is Daily, the Day list is unavailable.
If Frequency is Weekly, choices are days of the week (Sunday through Saturday).
If Frequency is Monthly, choices are days of the month (1 through 31).
- The Time (hour, minute) you want backup to run.
- The maximum age allowed before you Purge Backups.
The number of purge days (7 through 90) should be at least one day more than the
selected backup frequency.
The backup purge thread runs every day at 12:30 PM and deletes all backup
configurations that exceed the maximum age allowed.
4. Choose one of the following options to determine the scope of the backup:
• Select the Backup all fabrics check box, if necessary, to back up all switch configurations
of discovered switches in all fabrics