Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1540)

1468 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
LSP
37
3. Use the View selector to choose between displaying by Product or Admin Group ID.
- Product - The product view shows a tree structure under Products/Admin Groups with
products at the top level. Click the product name to expand the tree and display any
associated admin groups.
- ID - The ID view groups admin group instances by admin group ID. An admin group
instance may be configured in multiple products, so the same product may be displayed
under different admin group IDs.
4. Select a product or ID in the tree structure. The admin group name, ID, and product name
display in the Name, ID, and Product fields, and the interfaces in the admin group display
under Ports.
Viewing LSP path information
An LSP path is a list of router hops across an MPLS domain. Paths are configured separately from
LSPs. This allows paths to be used by any LSP that knows the path name. Take the following steps
to view LSP paths.
1. Select Configure > MPLS > LSP.
2. Select the Paths tab ( Figure 659 ).
FIGURE 659 LSP dialog box, Paths tab
3. A tree structure displays under Products/Paths with products at the top level. Click the product
name to expand the tree and display any associated paths.