Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 243)

Brocade Network Advisor SAN + IP User Manual 173
53-1003155-01
Event storage settings
5
FIGURE 65 Options dialog box (SAN Ethernet Loss Event pane)
2. Select SAN Ethernet Loss Events in the Category list.
3. Select the Enable events for ethernet loss check box.
4. Enter the Ethernet time out value (10 to 120 minutes).
5. Click Apply or OK to save your work.
Disabling SAN Ethernet loss events
To disable Ethernet loss events, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select SAN Ethernet Loss Events in the Category list.
3. Clear the Enable events for ethernet loss check box.
4. Click Apply or OK to save your work.
Event storage settings
You can configure the maximum number of historical events save to the repository, how long the
events will be retained, as well as whether to store historical events to a file before purging them
from the repository.
Configuring event storage
To configure event storage, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Event Storage in the Category list ( Figure 66 ).