Brocade Network Advisor SAN + IP User Manual v12.3.0 - Manual (Page 1610)

1538 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Viewing VIP Server information
38
FIGURE 704 Real server view of the virtual server
The following fields describe the components in the VIP Servers list on the VIP Servers dialog box.
VIP Servers list
• The name and IP addresses of the real server or virtual server.
• The name or port numbers of the real server port or virtual server port.
• Only the servers in a Management application user’s AOR are listed in the list. Also, if the
server is down, that server is not listed in the list, even if it is in the user’s AOR.
- If you select Virtual Server: Ports > Real Server Ports, the display shows the virtual servers
configured on a ServerIron device, and the virtual server ports configured under each
virtual server.
- You then see the real server ports to which the virtual server ports are bound.
- If you select Real Server: Ports > Virtual Server Ports, the display shows the real servers
configured on a ServerIron device, and the real server ports configured under each real
server.
- You then see the virtual server ports to which the real server ports are bound.
- If you select Virtual Server > Real Server, you see the virtual servers and the real servers
bound to them:
• A V icon identifies the entry as a virtual server port.
• An R icon indicates a real server port.
Status — The status of the real server, virtual server, or server port: Enabled, No response, or
Delete Pending.
Current Connections — The number of current corrections on the real server port or virtual server
port.